Wave Maker

• 8 Different Flow Rates
•  Quiet Operation
•  Wireless Controller – if 2 RW pumps are used, controllers can “sync” wirelessly, to enable the RW pumps to run “in sync” or “anti – sync”
•  Easy installation and maintenance
•  Magnetic bracket
• Night sensor – automatically detects when tank lights go out and slows the pump
• One-touch feed mode – slows pump for a period of 10 minutes
• High performance, powerful, water flow combined with low energy consumption
• Ceramic shaft for long life and durability
• Intelligent control system to generate various wave patterns to suit your tank
•  Extra-long cable for ease and comfort of placement, even on larger tanks
• Low voltage, safe, reliable UK power supply
• Can be used in a variety of aquarium sizes. Suitable for aquariums with glass up to 15mm thickness

Twin Pump Features:

• With these RW pumps they have a “wireless” controller. The wireless function only comes into play when 2 or more pumps are used together. When you have 2 pumps you can wireless “sync” the controllers so the the pumps with run in sync (all together) or anti sync (alternate). This essentially performs exactly the same function as the twin controller.
• Controls any pair of RW series of pumps RW4, RW8, RW15 or RW20.
• The twin controller option eliminates the need for each RW pump to have its own power supply and controller.
• Flow control for each mode – from 15% to 100% in 8 steps.
• Each pump can be set to a different flow rate.
• Ability to run pumps in sync or anti sync.
• Ability to adjust wave duration for each pump.
• Suitable for any single RW pump.
• Suitable for any combination of RW pumps up to 2 x RW20.
• Night mode – in built light sensor reduces flow to half maximum when darkness detected.

Dimensions (mm):

RW-4  79.5(L) x  52(W)
RW-8  103(L) x 66(W)
RW-15  126(L) x 79(W)
RW-20  128(L) x 87(W)

Included:

• Jecod RW Circulation Pump.
• Jecod RW Single Controller/s.
• 6A Mains Adaptor & UK 13A Fused Plug.

• Gyre Generation

New -Crossflow Technology

•  Virtually no dead spots
•  Evenly distributed flow rate throughout the entire aquarium
•  Water bounces back from the other side to create a full circulation, ie. generating “gyre flows”

Other Pumps

Standard Propeller Nozzle Technology

•  Dead spots with relatively poor water movement
•  Very strong flow in the center, making coral placement very difficult
•  Very weak flow near the other end of the aquarium

Why gyre generator and not wavemaker? Wavemakers excel in making waves, while waves are spectacular to watch in motion, they are in fact moving the majority of the water vertically up and down, with relatively low horizontal movement, especially near the bottom of the aquarium. On the other hand, gyre generators excel in moving sheer flow of water from one side of the aquarium to the other. The sheer flow of water is so strong that i would bounce back from the opposite site to achieve full circulation within an aquarium, ie. generating “gyre flows”.

Controller Features

• 10 speed controls
• Forwards Gyre
• Pulse Mode
• Feeding Mode
• Alternating Gyre
• Timer Functions

• Turbelle® nanostream® 6015

For aquariums from 40 to 200 litres (9 to 44 UKgal.)
Flow rate: about 1,800l/h (396 UKgal./h)
Energy consumption: 3,5W
Voltage / frequency:
230V/50Hz (115V/60Hz)
Cable length: 2m (78.7 in.)
Dimensions: diam. 70mm (2.7 in.)
Outlet: diam. 40/15mm (1.5/.59 in.)
Magnet Holder up to a glass thickness of 12mm (1/2″)

• Turbelle® nanostream® 6025For aquariums from 40 to 200 litres (9 to 44 UKgal.)
  Flow rate: about 2,800l/h (616 UKgal./h)
  Energy consumption: 5W
  Voltage / frequency:
  230V/50Hz (115V/60Hz)
  Cable length: 2m (78.7 in.)
  Dimensions: diam. 70mm (2.7 in.)
  Outlet: diam. 40/15mm (1.5/.59 in.)
  Magnet Holder with Silence clamp up to a glass thickness of 12mm (3/8″)

• Turbelle® nanostream® 6045For aquariums from 40 to 500 litres (9 to 110 UKgal.)
  Flow rate: 1,500 to about 4,500l/h (330 to 991 UKgal./h)
  Energy consumption: 5 to 7W
  Voltage / frequency:
  230V/50Hz (115V/60Hz)
  Cable length: 2m (8.7 in.)
  Dimensions: diam. 70mm (2.75 in.)
  Ejection: diam. 40/15mm (1.5/.59 in.)
  Magnet Holder with Silence clamp up to a glass thickness of 15mm (1/2″)